Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser that works with CAN buses. It's discrete, doesn't employ key fobs or LED indicators and is hidden within the vehicle's wiring.
It also allows the user to disable the system temporarily through Transport Mode to use it when they are renting their vehicle. This guide will take you through the installation of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key cloning attacks, hacking attacks and relay attacks. The system is directly connected to your vehicle's ECU and is protected by a unique pin code of your choice. It is inaccessible to thieves using diagnostic scanners and other advanced methods. It isn't able to be disabled by cutting circuits.
The system is simple to use, however it's essential to use a professional installation to ensure a smooth and secure connection with your vehicle's ECU. Installers approved by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest a tracking system or alarm to complete your vehicle's protection package.
To avoid the accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must remove your battery. When the battery is disconnected, the installer can start working safely. Basic hand tools are useful for making precise connections and a multimeter can be used to check the electrical properties and safety. Cable tie and insulation tape are crucial to ensure connections are secure and keep wiring neat. The user's manual offers specific instructions specifically tailored to your Ghost Immobiliser model.
During the installation process, it's crucial to select a grounding point that's free of debris and paint. The installer should be sure that the immobiliser's CAN H as well as CAN L wires are connected to the appropriate ports on your vehicle's ECU. Based on the model, these wires might require soldering or plugged in. A high-quality connector is recommended to ensure a sturdy and secure connection.
Once the install is complete Once the installation is completed, the customer can enable the Transport Mode. This allows mechanics or valet parking to use the vehicle, without knowing the pin code. The user must press the icon for service on the dashboard five times in two seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's an excellent choice for those who rent out their vehicles regularly through platforms like Turo. An immobiliser can cut down on insurance rates, as it decreases the likelihood of theft.
Getting Started
If you are seeking a solution to safeguard your vehicle from theft You can't go wrong with an autowatch ghost immobiliser. The device stops your car from running even the case that someone steals or copies your key. It is possible because of its advanced technology that prevents the engine from starting until the correct PIN code is entered.
The device connects to the CAN bus network in your vehicle and allowing it to communicate with the ECU directly. car ghost immobiliser uses the buttons on your dashboard and steering wheel to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your car. This is the best security system that will safeguard your car's pride and joy and preserve its value should you decide to sell it in the future.
Installing a ghost immobiliser is an easy process, however, it is crucial to follow the directions carefully to avoid issues with electricity and system malfunctions. You'll need to find a 12V power source and a good grounding on the car's chassis. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques to ensure a secure connection. Also, ensure that you cover the connections with heat shrink tubing and insulation tape to shield them from electrical short circuits and other issues.
After the wires are connected, you are able to connect the battery and begin the engine to check if the immobiliser is working. After you've confirmed that everything is working correctly and you are satisfied, you can place the immobiliser in a secure location in the vehicle. Be sure to conceal it in a secure manner to ensure that thieves cannot tamper with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified, which means that it complies with the highest standards of security and is a great deterrent to car thieves. It is invulnerable to hacking and key cloning and cannot be disabled without the code. The device is easy to use and can be set into an option for a service valet so that your vehicle won't be activated if you bring it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It connects directly to the vehicle's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable as an addition to your car. The Ghost Immobiliser will not interfere with the factory settings of your car, unlike other aftermarket systems which require the removal of circuit elements.
It's also undetectable to thieves using diagnostic scanning devices. This is because the system doesn't transmit and receive radio frequency signals, and it relies on CAN data to communicate with your ECU. It doesn't even require any modifications to your current key fobs.
Enter your sequence for disarming (either two or one button) and then switch on the ignition of your car to activate Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. Now you can begin driving your car in a safe manner.
Once installed, the Ghost Immobiliser protects your car against hacking or key cloning, while preserving its value. In Transport Mode you can temporarily disable the Ghost Immobiliser if you have to hand your vehicle to service or valet parking.
To complete the Ghost Immobiliser installation, you'll have to find a source of constant power (12V) and a grounding point. Make sure both are well-insulated and able to be touched. Cable ties are also suggested for bundling and securing the wires. This will reduce the chance of theft by thieves. Make sure you double-check the position of these points to avoid committing a mistake, and mark them with the help of tape or a label. It's important to inspect every connection for signs of wear and tear. Make sure that all connections are in place and properly insulated. Also, don't forget test the Ghost Immobiliser after installation is completed. This will ensure that the unit functions properly and that all connections and insulation are secure. If you encounter any issues, be sure to address them immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that connects seamlessly with your vehicle's ECU to prevent unauthorized motor starting. The innovative technology it uses protects your car from key cloning, hacking, and other methods that thieves employ to steal cars. The Ghost is a perfect complement to existing alarm and tracking systems to provide the most effective protection for your vehicle. The Ghost's unique features, combined with its discreet design, make it a popular choice for car enthusiasts and security conscious drivers.
It is crucial to follow the steps of installation to ensure proper integration of Ghost Immobiliser. The best place to start is to refer to the vehicle's wiring diagram, which will serve as a roadmap for locating and connecting the wires required. You'll then need to identify the grounding and power sources. Once these are found then you'll have to mark them in a way that they are easy to locate when installing. Finally, it's essential to use high-quality tools and materials. Basic hand tools can help with making precise connections and a multimeter can verify electrical values and ensure safety. Cable ties and insulation tape can help keep connections tidy and neat. Additionally, a user's manual will provide specific guidance specifically tailored to your Ghost model.
It is crucial to test the system before installing it. Enter the PIN code into the system and then start the vehicle. This step will confirm that the immobiliser works according to plan, and prevents unauthorised vehicle starts. This step should be performed regularly as part your regular vehicle inspections in order to ensure that the system is always functioning properly.
Once the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will keep your pride and joy safe from potential thieves and ensure that no one can take off with your vehicle without the proper PIN code. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts at theft or tampering. This allows you to locate your car if it's stolen.
The Ghost can be utilized on a variety of vehicles and is compatible with most major brands. If you're interested in protecting your car with this innovative device, call Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, which assures us that we follow strict guidelines in the installation of our products. This assures customers, insurance companies, and law enforcement agencies that all installations are done safely and properly.